SolverPI-Resin 6002

Product Detail

 Product Name: Thermoplastic Polyimide Resin

Item No.: SolverPI-Resin 6002

 

SolverPI-Resin 6002 is produced by  SOLVER POLYIMIDE which has good machinability. It can be mould pressing,injection molding, extrusion molding.The themoplastic polymide can be reprocessed and mixed with graphite,carbon black,fiberglass,ceramic powder,carbon fiber,aramid fiber,metal powder,molybdenum disulfide,invisible material and so on to change its characters,producing the bearing,valve,seal part,pipe panel all kinds of mechine parts,and invisible marterial.

 

The characteristic of SolverPI-Resin 6002

·High heat resistence.Can be long-uesd in temperature>300?.

·Excellent lubricity.Low COFand low frictional loss.

·High insulation,low Coefficient of Linear Thermal Expansion,deformation resistence,acid and alkalicresistence,salt tolerance,non-corroding.

·Radiation resistant.N appearance change under the 200kGyirradiatiin of ray.

Extremely low hydroscopicity.Resistence to water wapor,no hydrolysis.

·Low thermalconductivity.Good thermal insulation properties,low calorific value when it runs up.

·The low dielectyic constant.High impedance,no reflection to radar,good base material of invisible material.

·Fire retardant level FV-level 0.




 

The applied range of SolverPI-Resin 6002

   With the superior property,the ZTS-PI-I can be used in petrochemical industry,mining machinery,precision machinery,automobile industry,micro-electronic device,medical apparatus and instruments,aviation,aerospace,guided missile,naval vessels and so on.

In high speed and high pressure applications,parts with low COF and abrasion resistence.

Parts with good creep resistence and low plastic deformation.

Parts with good self-lubricating and good lubrication performance.

Parts with high bending?stretching?striking properties

Parts with high fire retardant level(no metal)

Parts with wave-transparent?microwave absorpting?invisible properties.




 

The permance index of SolverPI-Resin 6002

Terms of detection	Guideposts	Test standard and methods
Density(g/cm³)	1.28-1.32	GB/T1033.1-2008
Bending strength(MPa)(23?±2?)	>850	GB9341-2008
Flexural modulus(MPa)(23?±2?)	>25000	GB9341-2008
Impact strength Unnotched(KJ/?)(23?±2?)	>45	GB1043-1979
Impact strengrh notch(KJ/?)(23?±2?)	>8
Compressive strength(MPa)(23?±2?)	>950	GB1041-2008
Tensile strength(MPa)(23?±2?)	>700	GB1040-2006
Elongation%	5.0-7.0	GB1040-2006
Rockwell hardness(HRE)	80-100	GB9342-1988
Distortion temperature(18.6kg/?2)?	=300	GB1634-2004
Dilatation coefficient(23-200?),(10?5?/?/?)	3.5-5.5	GB/T2572-2005
Friction coefficient(PV=0.33MPa·m/s)	0.1-0.2	GB3960-1983
Wear volume(cm3)	(1.0-5.0)×10-5	GB3960-1983
Dielectric constant(1KHz)	2.0-3.0	GB1409-2006
Surface resistance(O)	1010-1013	GB1410-2006
Volume resistance(O·m)	109-1012	GB1410-2006
Note:When test the sample,you should indicate the model adopted by way of preparation (moulding, extrusion molding) is used in this standard moulding (280-380 ?) preparation of sample

Product appearance:faint yellow powder.

Product specification:powder,granule,proximate matter

Packing:5kg/bag,25kg/drum